Hang frames with adhesive strips for a no-hole solution

Adhesive strips and hooks let you hang lighter frames without putting any holes in the wall, making them ideal for renters or smooth painted surfaces.

Steps

1. Choose strips or hooks rated for the frame's weight (check the packaging).
2. Clean the wall area with rubbing alcohol and let it dry completely.
3. Press interlocking strip pairs together, attach one side to the frame back, peel the liner, and press the frame firmly to the wall for 30 seconds.
4. Remove the frame, press each wall-side strip firmly for 30 seconds, then wait at least one hour before re-hanging.
5. Use a level when placing the frame for final positioning.

Tips

• Strips bond poorly to textured, brick, or freshly painted walls (wait at least 7 days after painting).
• Do not exceed the stated weight limit; strips can fail suddenly if overloaded.
• To remove, pull the tab straight down slowly to release the adhesive without damaging paint.